Typically measured in kW and kWh. Current transformers can be easily and safely installed over existing electrical power lines without disconnecting the lines or interrupting service. They are used for a variety of application including building automation, performance verification, energy management and new technology assessment.
Like its name implies, the RoCoil mV produces a millivolt output for use with DENT’s ELITEpro and DATApro Series dataloggers. Available in standard lengths up to 72” and current ranges up to 6000A. The RoCoil mV requires 5-24V dc, which can be supplied from the Line-Powered ELITEpro or optional external power supply. See attachment for additional information.
The Fluke 323 True-RMS AC Clamp Meter, 400A AC, 600V AC/DC is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. True-RMS measurements and optimized ergonomics make the 323 a perfect general troubleshooting tool for commercial and residential electricians. This small and rugged clamp meter is ideally suited for current measurements up to 400A, in tight cable compartments.
The DENT Instruments 3000A Flexible Current Transformer is composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors wherestandard clamp-on current transformers could not be used. Specifically, it can be installed in tight spaces, or around breaker panels, cable bundles, wide or large bus bars and irregular shapes. See attachments for additional information.
A split-core AC current sensor responsive over the range of 5 to 200 amps AC for use with U12, UX120, and ZW data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.
A split-core AC current sensor responsive over the range of 5 to 100 amps AC for use with U12, UX120, and ZW data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.
A split-core AC current sensor responsive over the range of 5 to 50 amps AC for use with U12, UX120, and ZW data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.
A split-core AC current sensor responsive over the range of 5 to 20 amps AC for use with U12, UX120, and ZW data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.